Adjustable Shower Arm Extension 10" Long - Stainless Steel Chrome Finish - The Only Arm Designed With a GEAR JOINT That Won't Slip! Our Long Shower Extender Pipe Can Hold A Rainfall Shower Head System


Adjustable Shower Arm Extension 10" Long - Stainless Steel Chrome Finish - The Only Arm Designed With a GEAR JOINT That Won't Slip! Our Long Shower Extender Pipe Can Hold A Rainfall Shower Head System




Features
  • 10 INCH EXTENSION — The arm is about 11.25” long, but will give you a 10” extension from the wall pipe to your shower head. It can then be adjusted on both ends, moving up & down with a range of 18”. Perfect for any person, no matter the height!
  • GEAR JOINT DOESN’T SLIP — Our shower arm has a gear joint which locks tightly. Competitors use a normal round joint instead of our locking-type mechanism which will hold heavier shower heads. Ours has been tested & worked for 12” and larger rainfall shower heads.
  • NO PLASTIC PARTS — Our shower arm is made of high quality stainless steel with a polished chrome finish. It is extremely sturdy and has no plastic parts. It looks pretty, but is built tough!
  • EASY TO ADJUST — The shower arm has long knobs that are easy to grip, allowing you to unscrew and tighten quickly without any finger pain. Also, since it has a gear joint, you don’t have to tighten as much as other shower arms.
  • QUICKLY INSTALLS IN MINUTES — It mounts to the wall fitting all standard 1/2 pipe threads, and can be adjusted to swivel up and down to suit almost any height!
  • Adjustable Shower Head Extension Arm - 10 Inch Brass Shower Arm Extender Hardware - Brushed Nickel





    Features
  • 💦 UNLIKE OTHER SHOWER ARMS THAT need bungee cords to keep them in place, our adjustable shower arm SCREWS IN TIGHT and stays how you set it. The DURABLE SWIVEL JOINTS can support up to 3 pounds and come with safe, easy-to-tighten handle grips. The SOLID BRASS construction RESISTS CORROSION and withstands high pressure, heat, salt, acids, minerals, and grit.
  • 💦 DON'T PUT UP WITH SHOWER ARMS THAT decrease your shower’s water flow. Our adjustable shower arm maintains your shower’s water pressure. The Brushed Nickel finish makes the shower arms BEAUTIFUL TO LOOK AT as well as EASY TO CLEAN.
  • 💦 NO MORE DEALING WITH shower heads at the wrong height or angle. Optimize the shower head to suit you! Raise a low-hanging shower head for more showering coverage. Lower a hand held showerhead to more easily reach it. Extend a rainfall shower head away from the wall. This shower arm works with any shower head: handheld, rain, multifunction, etc.
  • 💦 OUR MISSION IS TO HAVE YOU enjoy a better shower right away. That is why we made our adjustable shower arm SUPER EASY TO INSTALL. Just twist it on! Installs in minutes without tools. No plumbers required. Fits all standard shower plumbing (has universal 1/2" threads). Includes FREE Teflon tape.
  • 💦 WE BELIEVE A SHOWER ARM SHOULD be installed once and then enjoyed for many years. What this really means to you is PEACE OF MIND that the shower arm will not crack, leak, or move out of place when you want a nice, long, RELAXING SHOWER. We are real people who use our own products every day. We expect the BEST FOR OUR FAMILY and want the SAME FOR YOURS.
  • Purelux Adjustable Shower Arm Extension Brushed Nickel, 10 inches Made of Solid Brass, Shower Head Extender





    Features
  • 10” solid BRASS adjustable extension arm, Brushed Nickel finish, constructed with gear locking mechanism, so don’t worry it will fall down once fixed. Maximum extension 10” in horizontal direction, 5” rising or 10” decline.
  • Standard 1/2” NPTF tapered thread allows for easy hand tightening to shower arm. Tool-free installation, plumber’s tape & instruction manual included. It is an easy and quick update from a traditional shower head to a modern, comfortable large Rainfall Shower.
  • Recommend to fit with Purelux 8" Rainfall showerhead, please search B01CSNLQMW on Amazon.
  • Recommend to fit with Purelux 6" Shower Arm, please search B074TDMDH2 on Amazon.
  • Hotel Spa 11" Solid Brass Adjustable Shower Extension Arm with Lock Joints. Lower or Raise Any Rain or Handheld Showerhead to Your Height & Angle / 2-Foot Range/Connection, Chrome Finish





    Features
  • Height & angle adjustable shower arm fits any shower head or hand shower
  • 2-Foot vertical movement range. This product only contains extension arm
  • Solid brass arm with easy to tighten reliable joints to Support heavier rainfall shower heads
  • Tools-free installation. Connects in minutes to any standard outlet, no tools required. No Teflon tape needed, extra thick washer provides secure leak-free connection
  • Adjustable Shower Arm Extension 10" Long - Stainless Steel Chrome Finish - The Only Arm Designed With a GEAR JOINT That Won't Slip! Our Long Shower Extender Pipe Can Hold A Rainfall Shower Head System





    Features
  • 10 INCH EXTENSION — The arm is about 11.25” long, but will give you a 10” extension from the wall pipe to your shower head. It can then be adjusted on both ends, moving up & down with a range of 18”. Perfect for any person, no matter the height!
  • GEAR JOINT DOESN’T SLIP — Our shower arm has a gear joint which locks tightly. Competitors use a normal round joint instead of our locking-type mechanism which will hold heavier shower heads. Ours has been tested & worked for 12” and larger rainfall shower heads.
  • NO PLASTIC PARTS — Our shower arm is made of high quality stainless steel with a polished chrome finish. It is extremely sturdy and has no plastic parts. It looks pretty, but is built tough!
  • EASY TO ADJUST — The shower arm has long knobs that are easy to grip, allowing you to unscrew and tighten quickly without any finger pain. Also, since it has a gear joint, you don’t have to tighten as much as other shower arms.
  • QUICKLY INSTALLS IN MINUTES — It mounts to the wall fitting all standard 1/2 pipe threads, and can be adjusted to swivel up and down to suit almost any height!
  • BRIGHT SHOWERS Adjustable Shower Arm for Rain and Handheld Shower Head, 10 Inch Universal Shower Extension Arm Brass Shower Arm Extender Hardware, Brushed Nickel





    Features
  • ✓ STURDY SHOWER ARM - Made of solid brass with durable swivel joints that won't crack and leak. Easy-to-tighten handle grip for your convenience. No plastic here
  • ✓ PREMIUM SURFACE TREATMENT - High polished surface finish for years of corrosion, no rust and easy to clean. Enhance the beauty of your bathroom
  • ✓ ADJUSTABLE SHOWER ARM - You can easy to adjust the height of the shower head, raising a low hanging handheld shower head or lower a rainfall showerhead while maintaining water flow rate
  • ✓ DURABLE KNOB - Two durable knobs can hold large showerhead in any position for a perfect shower experience, Ideal for all shower head types including handheld shower and rain shower
  • ✓ EASY TOOL FREE INSTALLATION - Just twist it on without any tools, no plumbers required and only takes you a few minutes to install, universal G1/2 threads to suit any standard pipe thread
  • Shower Head Extension Arm by JS Jackson Supplies, Adjustable 10 Inch Showerhead Extender with Flange, Solid Brass Construction, Universal Tall Hi-lo Pipe Height Extending (Black Finish)





    Features
  • Adjustable Height & Angle: Raise or lower the height and angle of your shower head with ease. Whether you are tall, short, or somewhere in between this shower head extension arm allows you to shower at your desired position.
  • Quality Construction: This extension arm is made of solid brass and has lock in place teeth that will keep your shower head where you want it. Simply unscrew, adjust, and screw. Choose from one of our four finishes to match with your specific bathroom color scheme.
  • Universal Fit: This shower arm is designed to fit with all standard connections and shower heads. This arm is compatible with all styles of shower head from: handheld, rain, rainfall, and fixed. Give yourself some more flexibility and a better showering experience.
  • Easy Installation: No tools needed. This shower arm easily installs with a few turns. We had included pipe sealant tape to ensure for a hassle-free install.
  • We are Here to Help: Please reach out with any questions or concerns. We take pride in the quality products that we offer and the care that we provide our customers. We want to help you create a better bathroom. Feel free to contact us through Amazon’s messaging platform.
  • ShowerMaxx, 10 Inches Stainless Steel Adjustable Shower Arm Extender, Adjustable Height and Angle For Fixed, Rain, Handheld Shower Heads, Universal NPT 1/2 inch Connector, Polished Brass Finish





    Features
  • ►SHOWERMAXX 10" LONG SHOWER ARM EXTENDER WITH WIDE DIAMETER FOR ALL STANDARD FIXED, RAIN AND HANDHELD SHOWER HEADS - Our ShowerMaxx Shower Arm Extender is 10" long with 1/2 inch Pipe NPT Threads that fit all standard shower heads. With wide diamater, your water flow won't be restricted unlike other extenders, so you can enjoy your high pressure shower.
  • ►STAINLESS STEEL AND BRASS CONSTRUCTION IN POLISHED BRASS FINISH - Our extension arm tube is constructed with stainless steel with all solid brass fittings making it durable and anti corrosion. It’s high quality so you can be worry free that it will not leak!
  • ►ADJUSTABLE HEIGHT AND ANGLE - Our extender is designed to swivel up and down to your desirable angle and height with 18 inches of vertical movement range. With easy to tighten joints, our extender supports even heaviest of the shower heads. Just put it to your desirable postion and lock it with the knobs that are easy on your thumb.
  • ►EASY IN-HOME INSTALLATION - Your ShowerMaxx extender is easy to install just within minutes to any standard outlet and showerhead. It comes with teflon tape to make the installation easiest and leak free!
  • ►PEACE OF MIND LIFETIME WARRANTY – ShowerMaxx manufactures high quality premium products. Each extender comes with a Peace-of-Mind Lifetime Warranty. Our friendly support team are on hand to take care of you if you have any question or for whatever reason you’re not completely satisfied with your purchase, please message us via Amazon.
  • Adjustable Shower Head Extension Arm, Brass Shower Arm with Lock joints (10in, Oil rubbed Bronze)





    Features
  • The adjustable height fully matches your height: you can adjust the shower angle and height according to your needs. The overhead shower can be conveniently placed horizontally above the head to achieve maximum shower coverage; the height of the handheld shower can also be lowered to make it easier to reach.
  • Durable material: All brass materials can be used for many years, and the rotary joint is very durable and will not break or leak.
  • Corrosion resistance: can withstand heat, salt, acid, minerals and sand in water without rusting. Can be used outdoors: beaches, recreational vehicles, outdoor swimming pools or anywhere.
  • Easy to install: No plumber or tools are needed to install in 5 minutes.
  • High-quality after-sales service: 5-year warranty service. We are very confident in our products and believe that it can also bring you a good experience. If you have any questions, you can contact us to provide you with service!
  • 10 Inches Shower Head Extension Arm, Shower Arm Extension, Shower Head Extender, Lower Shower Head, All Solid Brass Construction, Chrome





    Features
  • *10" Makes the handheld very casual: perfect solution to make the existing shower heads no longer unattainable
  • *Strong enough: all solid brass is made for lifetime maintenance, worry-free weight, and durability
  • *Sophisticated workmanship with unique leak proof structure: solid brass rod seamlessly hollowing, advanced precision plating, smooth and elegant
  • *Fit most shower fittings: 1/2 " IPS female and male, adapt most standard shower system-shower base, shower arm, shower head and hose
  • *Super simple installation: several minutes with the tape and wrench(included in the package)as the manual says. If there is any problem with the installation, please contact us immediately. We will help you solve the problem as soon as possible